20 Before Using Your MachineENGLISH Problem Documentsz To prevent document jams in the ADF, do not attempt to load the following types ofdocuments into the fax:z Remove all staples, paper clips, etc. before loading the document into the ADF.z Make sure any glue, ink, or correction fluid on the paper is completely dry before loading thedocument into the ADF.z Make a photocopy of any document that will not feed into the fax so that you can then load thecopy into the ADF.Paper RequirementsYour fax supports A4-, letter-, and legal-size paper in portrait orientation. You can use regular copierpaper, cotton bond paper, or typical letterhead. Your fax does not require special ink jet paper.Always use paper without curls, folds, staples, or damaged edges. Look at the label on the packageto see if the paper has a preferred side for printing. Printable AreaThe shaded area below shows the printable area of letter- and legal-size paper. Be sure to printwithin this area.- Wrinkled or creased paper- Torn paper- Coated paper or glossy paper- Thick paper- Curled or rolled paper- Carbon paper or carbon-backed paper- Onion skin or thin paper- EnvelopesNoteBe sure to test paper before purchasing large quantities.LTR/LGL3 ±1.5 mmFEEDDIRECTION5 mm6.4 ±1.5 mm 6.4 mm~
