| 
38 Receiving FaxesENGLISH Polling to Receive DocumentsThe polling feature allows you to request a document to be faxed to you from another faxmachine. The sending party only needs to make sure the document is on a fax machine andready to be sent. Thus, when your fax polls the other fax machine, the document is sentautomatically. The fax can poll any fax machine that supports polling.1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy].3 Use [{] or [}] to select , then press [Start/Copy].4 Dial the fax number of the fax machine you wish to poll.Use one of the dialing methods described.5 Press [Start/Copy].Your fax begins receiving the document.Setting Caller IDIf the setting is set to , the caller’s name and phone/fax number appear on theLCD when you receive a call. You can also set the fax to reject unwanted calls (JX510P only).1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy].3 Use [{] or [}] to select , then press [Start/Copy]. The LCD displays.4 Use [{] or [}] to select to enable the feature, then press[Start/Copy].To disable the feature, use [{] or [}] to select , then press[Start/Copy]. Press [Stop/Reset] to return to standby mode.5 Press [Start/Copy].Notez Before attempting to poll a fax machine, make sure that the other fax machine supports polling.z Your fax cannot do polling transmissions.Notez is only available in some countries.z To use this feature, you will need to subscribe for a caller ID service (only available in some countries).The feature uses the Telcordia or the ETSI EN 300 778-1 protocol. Contact your localtelephone company for detailed information on this service.z If the setting is set to , the machine will not enter the power saver mode (seepage 12).TEL= 3456xxxx |
