| 
37Receiving FaxesENGLISH Receiving to Memory TemporarilyYou can enable/disable memory receiving feature temporarily by selecting when [Menu] is pressed.1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy].3 Use [{] or [}] to select , then press [Start/Copy].4 Use [{] or [}] to select , then press [Start/Copy].5 Use [{] or [}] to select or , then press [Start/Copy].6 Press [Stop/Reset].Setting ends and the fax returns to standby mode.z If you select in step 5, received faxes will be printed automatically.z If you select in step 5, the fax starts receiving documents in memory. The LCDdisplays . Changing Calling Volume1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy].3 Use [{] or [}] to select , then press [Start/Copy].4 Use [{] or [}] to select , then press [Start/Copy].5 Use [{] or [}] to select , then press [Start/Copy].6 Use [{] or [}] to change the volume, then press [Start/Copy].7 Press [Stop/Reset].Setting ends and the fax returns to standby mode. Receiving Documents in Memory While Performing Another Task orWhen a Problem OccursIf your fax is performing another task or encounters a problem when receiving a document, itautomatically stores the unprinted pages in memory, and the LCD displays MEMORY> as well as one or more messages. For an explanation of the message(s) and detailson the action to take, see page 88.NoteIf the setting is set to , the following will not be printed automatically:ACTIVITY REPORT, TX REPORT, RX REPORT, MULTI TX REPORT and MEMORY CLEARREPORT.NoteOnce the pages are printed, they are deleted from memory. |
