Canon JX510P User Manual

Also see for JX210P: User guide User guide Setup instructions Instruction manual On-screen manual

Contents

73TroubleshootingENGLISH2 Open the Cover.3 Gently remove the jammed paper inside thefax.4 Press [Stop/Reset].The fax returns to standby mode.If the Power Disconnects UnexpectedlyThe date and time setting on your device and all documents stored in memory* will be kept.*All documents stored in memory will be deleted for the JX210P model.If the power disconnects, the following will apply:z You will not be able to send or receive faxes or make copies.z If a telephone is connected to the machine, you can receive voice calls.z Whether you are able to make voice calls or not depends on your telephone type.Paper Feeding Problems Paper Does Not Load Paper is Loaded Skewed (Printing is Skewed) Multiple Sheets Load Into the Fax at the Same TimeCause ActionThe Rear Tray may contain too manysheets.Make sure the paper stack in the Rear Tray does not exceed the paper limitmark ( ) (see page 21).Paper may not be loaded correctly. Make sure the paper stack is loaded properly in the Rear Tray, and that thePaper Guide is adjusted correctly (see your setup sheet or page 21).Cause ActionPaper may not be loaded correctly. z Make sure the paper stack is loaded properly in the Rear Tray, and that thePaper Guide is adjusted correctly (see your setup sheet or page 21).z Make sure the right edge of the paper stack is aligned with the right side ofthe Rear Tray and the Paper Guide is aligned with the left edge of the stack(see your setup sheet or page 21).z Make sure the paper exit path is clear.Cause ActionPaper may not be loaded correctly. Make sure the paper stack is loaded properly in the Rear Tray, and that thePaper Guide is adjusted correctly (see your setup sheet or page 21).Sheets of paper may be stickingtogether.Be sure to tap the stack on a flat surface before loading it in the Rear Tray. Thiskeeps the sheets of paper from sticking together.