30 Sending FaxesENGLISH8 Press [Start/Copy].z Press [Start/Copy] when using directory dialing.z The fax scans the document into memory.9 The fax will automatically dial at the programmed time. Sending Other Documents While the Fax is Set for Delayed SendingYou can send, receive, and copy other documents even when the fax is set for sending at apreset time.To send or copy other documents after setting the fax for delayed sending, simply send or copyusing any other sending procedure in this guide. Canceling Delayed Sending1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy].3 Use [{] or [}] to select , then press [Start/Copy].4 Use [{] or [}] to select the transaction number () of the documentyou want to delete, then press [Start/Copy]. The LCD displays ) NO=(#)>.z If the LCD does not change after you press [{] or [}], this means only one transaction isstored in memory.z If you are unsure of the transaction number (), print the MEMORY LIST (seepage 40).5 Press [ ] to delete the document.If you want to continue sending, press [#].6 Press [Stop/Reset].The fax returns to standby mode.NoteIf appears on the LCD during scanning, delete unnecessary documents fromthe memory (see page 41), then rescan your fax.NoteDelayed sequential broadcasting is applicable for sending one document to more than one locationat a later time when multiple fax numbers are dialed (see page 31).TX/RX NO. 0001
