6-20 Sending Faxes Chapter 6Memory SendingMemory sending is a quick and easy way to send a fax. The LASERCLASS 2060 scans the document into its memory as it dials the faxnumber. If the line is free, the LASER CLASS 2060 begins sending the faxas it scans the rest of the document.The LASER CLASS 2060 has enough memory to store up to 340 pages(fewer if the document contains many graphics or particularly densetext).Follow the instructions below to send a document with memory sending:Be sure to adjust the document feed lever before loading your document.See page 6-6 for details.1. Prepare the document and load it, face down, into the AutomaticDocument Feeder (ADF).❏ Once the document is loaded, the LCD display shows thefollowing:❏ If necessary, you can adjust the resolution and contrast. See page6-13 for details.❏ You may not be able to use memory sending if the percentageshown in the MEMORY IN USE display is close to 100%. In thiscase, use manual sending via the handset to send yourdocument.2. Dial the other party’s fax number.❏ Use one of the dialing methods described on page 6-17.❏ If you must first dial a digit to get an outside line (“9” forexample), add a pause after that digit by pressing the Pausebutton, as shown in the example above.NM E M O R Y I N U S E 0 %D O C U M E N T R E A D YT E L = 9 p 8 3 3 4 7 7 7
