Frequently AskedQuestionsChapter 13 Frequently Asked Questions 13-21Problems Feeding Paper into the LASER CLASS 2060If you are having problems feeding paper into the LASER CLASS 2060,check the following table.If you are using the multi-purpose tray, whenever you correct one ofthese problems, be sure to remove the paper from the multi-purpose trayand reload it. See page 2-39.The following problems can also cause the paper to jam in the unit. Seepage 13-5 for instructions on clearing paper jams.NProblem Possible cause SolutionPaper does not feedthrough the multi-purpose tray?The multi-purpose tray maycontain too many sheets.Make sure the multi-purpose tray is not filledpast the limit. See page 2-39.Paper may not be insertedcorrectly in the multi-purpose tray.Make sure paper is insertedall the way into the multi-purpose tray. See page 2-39.Printing is skewed? Paper may not be stackedcorrectly in the multi-purpose tray.Make sure the stack of paperis straight in the multi-purpose tray.Make sure there are no gapsbetween the stack of paperand the paper guides.See page 2-45.Make sure the paper exitpath is clear.Several sheets feedthrough the multi-purpose tray at once?Paper may not be loaded inthe multi-purpose traycorrectly.Make sure paper is insertedcorrectly in the multi-purpose tray. See page 2-39.Sheets of paper may besticking together.Make sure the paper is notsticking together. Be sure tofan the stack of paper beforeplacing it in the multi-purpose tray. See page 2-39.
