13-26 Frequently Asked Questions Chapter 13Faxing ProblemsUse the following tables to solve problems that can occur when sendingand receiving faxes with the LASER CLASS 2060.Sending FaxesProblem Possible cause SolutionCannot send a fax? The LASER CLASS 2060 mayhave overheated and shutitself down.If you suspect this, unplugthe LASER CLASS 2060 andlet it cool for severalminutes. Then plug it backin and try sending again.The LASER CLASS 2060 maynot be set for the type oftelephone line you have(pulse/tone).Make sure the LASERCLASS 2060 is set for thetype of telephone line youhave. See page 3-12. (If youare not sure what type ofline you have, contact yourlocal telephone company.)The document may not havebeen set correctly in theAutomatic Document Feeder(ADF).Remove the document,stack it, and feed it into theAutomatic DocumentFeeder (ADF) again.The one-touch or codedspeed dialing number youused may not be registered.Check the content of theOne-Touch or Coded SpeedDialing button and makesure it was registeredcorrectly. See Chapter 5.The receiving fax machinemay be out of paper.Call the other party andmake sure they have paperin their fax machine.The LASER CLASS 2060 maybe sending anotherdocument from memory.Allow time for the currentdocument to finish sending.An error may have occurredduring sending.Print an activity report andcheck for an error code. Seepage 12-2.
