Setting Up YourLASER CLASS2060Chapter 2 Setting Up Your LASER CLASS 2060 2-33Installing/Replacing the Toner CartridgeThe LASER CLASS 2060 uses a Canon FX-3 toner cartridge. Theprocedure below explains how to install the cartridge for the first time,and how to replace it when the toner runs out.When the message REPLACE CARTRIDGE appears, the toner in thecartridge may simply be unevenly distributed. Before replacing thecartridge, follow the instructions on page 13-25 to evenly distribute thetoner. If after doing this the message remains displayed or the printquality is low, replace the cartridge as described below.Canon makes numerous cartridges. The FX-3 toner cartridge has beendesigned specially for the LASER CLASS 2060 and is the only one Canonrecommends that you use.1. Remove any documents and/or printed pages from the unit.2. Make sure the LASER CLASS 2060 is plugged in.3. Open the front cover by lifting the right side release latch of the unit.❏ Lift the cover forward to its open position.N
