Using TLS94WS-082Transport Layer Security (TLS) is a mechanism for encrypting data sent or received over the network. Encryptingcommunication with TLS when using Remote UI reduces the risks of data eavesdropping and tampering duringcommunication.To use TLS encrypted communication for Remote UI, specify the key and certificate (server certificate) you want to use,and then enable TLS on Remote UI.This section describes how to configure the settings using Remote UI from a computer.On the operation panel, select [Menu] in the [Home] screen, and then select [Management Settings] to configure thesettings. However, the operation panel can only be used to enable or disable TLS on Remote UI. [Use Remote UI](P. 454)Administrator privileges are required. The machine must be restarted to apply the settings.Required Preparations● Prepare the key and certificate to use for TLS encrypted communication. Managing and Verifying a Keyand Certificate(P. 312)1 Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 347)2 On the Portal page of Remote UI, click [Settings/Registration]. Portal Page ofRemote UI(P. 349)3 In [Network Settings], click [TLS Settings].➠ The [TLS Settings] screen is displayed.4 Specify the key and certificate to use for TLS encrypted communication.1 In [Key and Certificate Settings], click [Key and Certificate].➠ The [Key and Certificate Settings] screen is displayed.2 To the right of the key and certificate to use, click [Register Default Key].● When you click the key name (or certificate icon), the certificate details appear.● On the certificate details screen, click [Verify Certificate] to verify that the certificate is valid.5 Set the TLS version and algorithm.1 Click [TLS Details] [Edit].➠ The [Edit TLS Details] screen is displayed.2 Set the usable version and algorithm, and click [OK].Some combinations of versions and algorithms cannot be used. For the supported combinations ofversions and algorithms, see the TLS specifications. TLS(P. 33)[Allowed Versions]Security308