Canon MF275dw User Manual

Also see for MF272dw: User guide Setup guide

Starting Remote UI94WS-098To use Remote UI, enter the IP address of the machine into a Web browser on a computer, and log in with SystemManager Mode or General User Mode. The functions available with Remote UI vary depending on the mode youlogged in to.Required Preparations● Check the operating environment of Remote UI. Supported Environment(P. 35)● Connect the computer you are using to operate Remote UI to the machine over a network. Setting Up theNetwork(P. 48)● Check the IP address of the machine. Checking the Network Status and Settings(P. 87)1 From a Web browser on a computer, access the following URL.http:///➠ The Remote UI login screen appears.When Remote UI communication is encrypted, a warning message about the security certificate mayappear. If there are no problems with the certificate or TLS settings, you can continue operations.When entering an IPv6 address, enclose the IP address in brackets [ ].Example:http://[fe80:2e9e:fcff:fe4e:dbce]/If the Remote UI Login Screen Is Not DisplayedWhen a message such as [Cannot access Remote UI.] is displayed and the login screen is not displayed, seethe following:Cannot Access Remote UI(P. 554)2 Select [System Manager Mode] or [General User Mode], and enter the items requiredfor login.[System Manager Mode]When the System Manager ID is set, enter the System Manager ID and System Manager PIN. SystemManager ID and PIN(P. 6)Managing the Machine347