Canon MF275dw User Manual

Also see for MF272dw: User guide Setup guide

5 Lines LCD Model1 On the operation panel, select [Menu] in the [Home] screen, and press . [Home]Screen(P. 112)2 Press [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings][IP Address Settings] .If the login screen appears, enter the System Manager ID and PIN, and then press . System ManagerID and PIN(P. 6)3 Set the IP address.When Manually Setting the IP Address1 Select [Auto Acquire] and press .➠ The [Auto Acquire] screen is displayed.2 Press [Select Protocol] [Off] .3 Press [Auto IP] [Off] .4 Select [] and press .➠ The [IP Address Settings] screen is displayed.5 Select [Manually Acquire] and press .➠ The IP address input screen is displayed.6 Enter the IP address and press .7 Enter the subnet mask and press .8 Enter the gateway address and press .When Assigning an IP Address Automatically1 Select [Auto Acquire] and press .➠ The [Auto Acquire] screen is displayed.2 Configure the Auto Acquire setting, as needed.[Select Protocol]Normally, set to [DHCP]. However, when [DHCP] is set in an environment where DHCP cannot be used,the machine will continue to confirm Auto Acquire in the network, creating unnecessary communication.When not using DHCP, set this to [Off].Setting Up71