103E Using a Memory Card(MV4i MC only)Recording Still Images to a Memory Card-MV4i MC only-3PHOTO21OFFPOWERVCRP.SCANMOVIECARDRECCARDPLAY4PHOTOTake still images to a memory card. You can also record onto a memory cardimages from a tape in the camcorder, or images input through the DV in terminal.• Moving pictures cannot be recorded onto a memory card.• Images input through the A/V in terminal cannot be recorded onto a memory card.• Memory cards cannot record audio.• When you are using an SD Memory Card, make sure the protect switch is set toallow recording.Make sure a memory card that has enough memory available is inserted into thecamcorder.1. Set the POWER dial lock lever to the 22 position.2. Press the button next to the POWER dial and hold, turn thePOWER dial to CARD REC.• The number of images that can still be recorded on the memory cardappears in the display.• The camera will turn itself off if you are using a battery and do not operatethe camera for more than about 5 minutes. Set the POWER dial to OFF andthen back to CARD REC.3. Press the PHOTO button halfway and hold it.• Exposure is locked.• During autofocus F flashes white in the display as the camcorder adjust thefocus and it is displayed continuously as a green mark when the camera isready to take the still image.4. Press the PHOTO button fully down to record the still picture.• F disappears from the display. The shutter sound sounds and simultaneouslythe display appears to close for an instant as if it were a shutter releasing.• The image appears in the display and is recorded to the memory card.• While the camera is recording the still image, RECORDING TO CARDflashes and appears red in the display. (It appears white when inmirror mode and on the screen of a connected TV.)>>>>CARDR E C
