26EMasteringthe BasicsBuilt-in speakerAdjust the speaker volume by turning the SELECT dial.• Turn the SELECT dial up to increase the volume, and down to lower thevolume.• A bar appears in the display to indicate the current volume. It disappears in 4seconds.• You can turn off the volume completely by turning the SELECT dial down untilOFF appears. You can monitor the sound again by turning the SELECT dial up.• You can adjust the headphone volume separately from the built-in speaker,either during PLAY (MV4i and MV4i MC: VCR) mode or camera mode. Thevolume level is the same regardless of mode.(Use the DU-300 Docking Unit to connect the headphones, p. 65.)• The levels you adjust for the built-in speaker and headphones are memorizedseparately. The camera remembers your levels even if you turn the camera offand back on again.• The speaker turns off when the camera is set to any mode other than PLAY(MV4i and MV4i MC: VCR) or when you use headphones.• Sometimes audio may sound distorted when the volume is turned up high. Ifthis happens, turn down the volume.OFFPOWERPLAYP.SCANMOVIEThe camcorder has a built-in speaker so you can review the sound track alongsidethe picture when you’re using the LCD screen to play back a tape. The built-inspeaker is monaural.
