27E Masteringthe BasicsConnections for Playback on a TV ScreenYou can connect the camera to a TV or VCR in order to play back yourrecordings. You will need to attach a power source to the camera ( 9).Power off all devices before starting the connections.See your TV or VCR instruction manual for further details.The DU-300 Docking Unit is fitted with microphone, headphone, S-video andLANC m terminals. Connect it to the base of the MV4/MV4i/MV4i MC via thedocking unit attachment terminal.Attaching the DU-300 Docking Unit1. Make sure that the camera is switched off.2. Align the terminals of the docking unit and the camera.3. Push the docking unit onto the camera and turn the locking screwclockwise to fix it securely onto the base.• To remove, turn the locking screw anticlockwise and pull the docking unitfrom the base of the camera.LOCKING SCREWTIGHTENLOOSENAttach the enclosed ferrite core beforeyou connect the STV-250N Stereo VideoCable to the camera.Attach the ferrite core to the cable about5 cm from the plug end (the plug to beconnected to the camcorder) of theSTV-250N Stereo Video Cable.• Pass the cable through the centre of thecore and wrap it around the core once,then close the unit until it clicks shut.5cmSTV-250N Stereo Video CableAttaching the Ferrite Core
