90EEditingDo not connect/disconnect any cables to/from the camera when dubbing audio orpreparing to dub audio.1. Locate the point where you want to start audio dubbing, then pressthe PAUSE button.• You can use the playback buttons on the body of the camera or the specialplayback functions on the wireless controller in the same way as in playbackmode.• The camera becomes set to playback pause mode.2. Press AUDIO DUB.• AUDIO DUB. and appear on the display.3. Press the PAUSE button.• Audio dubbing starts.• Direct your voice into the microphone.• changes to .4. When you get to the point where you want to stop dubbing, pressthe STOP button.• Audio dubbing stops and AUDIO DUB. disappears from the display.• The camera returns to stop mode.• You can also set zero set memory ( 79) at the place you want to stopaudio dubbing, then every time you return to that position, audio dubbingwill cancel.• If instead of pressing STOP you press PAUSE, the camera will return to theplayback pause mode.REW PLAY FFSEARCHSELECTZERO SETMEMORYAUDIODUB.STOPPAUSE SLOW+ /– /×2OFFPOWERPLAYP.SCANMOVIEREMOTEDubbingPLAY
