137E AdditionalInformationMiscellaneousCause and/or what to do about it• The remote sensor mode is set toOFFB in the menu ( 44).• The remote sensor modes of thewireless controller and the cameraitself are different ( 44).• The batteries are dead or not inserted.• Check the screen displays ( 137).• External interference may cause thecamera’s microprocessor tomalfunction temporarily. If randomletters appear in the display or ifnormal operation is interrupted,remove and then replace the powersource.• Remove the cable and then reconnectit or turn the power off and back onagain.• This is not a malfunction.Problem? The wireless controller doesn’twork.? The power indicator is flashing.? The camera malfunctions.? The DV cable is connectedcorrectly, but there’s nothing inthe display.? The camera becomes warm duringuse.? The PHOTO button doesn’t work.? The image cannot be erased.• The memory card is not loaded( 99).• You are using an SD Memory Cardand it is set for erasure prevention.Change the position of the protectswitch.• The memory card is full. Eraseimages ( 115) or insert a newmemory card.• You have reached the maximum filenumber. Set the file numbering toRESET through the menu ( 101)and insert a new memory card.• You are using an unformattedmemory card. Format the card( 122).• The image is protected ( 112).• You are using an SD Memory Cardand it is set for erasure prevention.Change the position of the protectswitch.
