8-10 Setup and Other Utilities in the Desktop Manager Chapter 8• Default Action if No Answer to TelephoneYou set this option to Receive if you want the MultiPASS C5000to handle an incoming call, detected as a telephone call that isnot answered, as an incoming fax. If no fax is received, the line isthen disconnected. If you set this option to Disconnect, theMultiPASS C5000 automatically disconnects the unanswered callwithout switching to try and receive a fax.m Answering Machine Mode OptionsYou select this option to set the MultiPASS C5000 to automaticallyswitch to fax receive mode if your telephone caller does not speakwithin the specified amount of time.You can set the number of seconds (1-99) the MultiPASS C5000 willwait before switching to fax receiving mode if the telephone callerdoes not speak.m RemoteYou select the Receive option so that you can receive a fax bypressing an ID code on the telephone attached to the MultiPASSC5000. You assign a remote Identification Number (00-99) thatsignals the MultiPASS C5000 to receive the fax. The default numberis 25.m DRPD Switch OptionsIf you select DRPD for the Receive Mode, you need to set up theRing Pattern, Action, Fax ID, and Fax Number. See the DPRDdescription starting on page 5-9 for complete details on how thesesettings work with your MultiPASS C5000.
