Canon MultiPASS F50 User Manual

Also see for MultiPASS F50: Reference guide Software user's guide Fax guide Setup instructions User manual

Contents

touch tone dialing, you can reset the F50 for rotary dialing. See the OnlineUser’s Guide for instructions on how to switch from Touch Tone to RotaryDialing.Setting the Fax Receive ModeThere are five possible modes for receiving faxes:FFAAXX//TTEELL AAUUTTOO SSWW If you connect a phone to an extension line for the sameline as the F50 but not directly to the F50, the phone willring for all incoming fax and voice calls. If the call isanswered on the extension phone before the F50 picksup, you still have the option of receiving the fax. See“Receiving Faxes” on page 25.FFAAXX OONNLLYY MMOODDEE The F50 will automatically receive all calls as fax calls.Voice calls will not be recognized by the F50 in thismode.DDRRPPDD Distinctive Ring Pattern Detection (DRPD) allows the F50to distinguish between incoming voice and fax calls. Usethis setting if you have multiple phone numbers on thesame line, and DRPD enabled on these lines by yourphone company. This mode should also be used if youhave voice mail service on the line instead of ananswering machine. See “Setting a Distinctive RingPattern” on page 17.MMAANNUUAALL MMOODDEE If a phone is connected to the F50, the phone will ringevery time a call comes in. You can answer the call, orpress SSttaarrtt to receive an incoming fax after lifting thehandset.AANNSS.. MMAACCHHIINNEE MMOODDEE An answering machine must be connected to the F50,and the call will go to the answering machine first. If afax tone is detected on the incoming call message, theF50 will receive the fax.See chapter 4 “How to Fax” for procedures on receiving and sending faxes.To select a receive mode:F50 User’s Manual14F50 Chapter 3.qxd 06/01/2001 4:08 PM Page 14