Canon MultiPASS F50 User Manual

Also see for MultiPASS F50: Reference guide Software user's guide Fax guide Setup instructions User manual

Contents

• Place the top of the document flush to theguide plate.To load a document in the ADF:• Lift the document cover to make sure thereare no documents on the glass.• Adjust the document guide tabs as needed.• Insert the document(s) in the ADF tray as shown, facing up, until you hear a beep.The F50 will feed the top page first.You can load up to 30 letter-size pages of 20 lb.paper in the ADF at one time, or up to 10 legal-size pages.If a paper jam occurs, see below.Clearing Paper Jams in the ADFIf documents are fed into the ADF (automaticdocument feeder) improperly, they can jam.Jams can also be caused by paper stacked incorrectly in the multi-purpose tray.To remove a jam from the paper output tray:1 Remove paperGently pull any jammed paper out of the paper output.2 Restart operationPress to start the operation again.If you do not see jammed paper in the paperoutput, check the scanning unit for a jam.To remove a jam from the scanning unit:1 Shut off powerPress the button to turn the F50 off.ON/OFFResumeF50 User’s Manual42F50 Chapter 6.qxd 06/01/2001 4:08 PM Page 42