To send a fax using Coded Speed Dialing:1 Enter fax modePress to enter fax mode.2 Load document in ADFInsert the document face up in the ADF tray.3 Select numberPress then, using the numeric keypad, enter the desired code.The fax will automatically be scanned and sent.Group DialingYou can send the same fax to a group of numbers that have been entered forone-touch or coded speed dialing. For example:Sales Contact Group: Joe (one-touch dial position 02)Fred (one-touch dial position 03)Mary (one-touch dial position 04)Customer Group: ABC Supplies (coded dial position 21)Thrift Supplies (coded dial position 22)Best Hardware (coded dial position 14)You can combine one-touch dial and coded dial entries in a single group diallist. However, you cannot manually enter phone numbers into a group dial list.Before setting up a group dial list, print a list of one-touch or coded speed dialnumbers and codes. You can also print group dial lists after they are set up. See“Printing Reports on Demand” on page 18 for procedures.To set up a group dial list:1 Access GROUP DIALPress to enter fax mode.Press then until TTEELL RREEGGIISSTTRRAATTIIOONN appears.MenuMenuFaxCoded DialFaxF50 User’s Manual28F50 Chapter 4.qxd 06/01/2001 4:08 PM Page 28
