4) Remove the lid r (both front and rear).Figure 4-3295) Free a length of about 40 mm of charging wire from the reel (0.06-mm dia.), and forma loop with a diameter of about 2 mm at the end.Reference:To form a loop, wind the charging wire around a hex key once, and twist the hexkey four to five times; then, twist the charging wire.6) Cut the twisted end of the charging wire (excess) to 1 mm or less with a nipper.Figure 4-330CHAPTER 4 IMAGE FORMATION SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-39r rcorona wireless than 1mm
