E. I/O Display Mode [2]To start I/O display mode, press ‘2’ (keypad) and the OK key in sequence.To select an item, press the number (keypad) and the OK key in sequence.To delete an item, press the Clear key.• A press on the Copy Start key while the service mode description is beingshown starts copying operation.Table 11-717• LEDCHAPTER 11 TROUBLESHOOTINGCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 11-147No.201∫209210∫216217∫219220∫225226∫234235∫247248∫260DescriptionPIO input/output port of the DC controllerMaster CPU input/output of the DCcontrollerIPC input/output port of the DC controllerSlave CPU input/output of the DCcontrollerCPU input/output port of the pedestalcontrollerCPU input/output port of the DF controllerCPU input/output port of the sortercontrollerRemarksSome of the LED lamps turn onaccording to number to representan 8-bit input/output; see below.Some of the LED lamps turn onaccording to number to representan 8-bit input/output; see below.Some of the LED lamps turn onaccording to number to representan 8-bit input/output; see below.Some of the LED lamps turn onaccording to number to representan 8-bit input/output; see below.Some of the LED lamps turn onaccording to number to representan 8-bit input/output; see below.Some of the LED lamps turn onaccording to number to representan 8-bit input/output; see below.Some of the LED lamps turn onaccording to number to representan 8-bit input/output; see below.1 - a1 - b1 - c1 - d1 - g1 - f1 - e2 - a
