5-60CHAPTER 5 PICK-UP/FEEDING SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)C. Registration Roller Assembly1. Removing the Registration Roller1) Remove the developing assembly and the drum unit.2) Remove the inside left cover and the inside right cover.3) Release the feeding assembly.4) Remove the transfer charging assembly.5) Remove the main drive assembly. (See p.7-19.)6) Remove the screw q, and disconnect the connector w.Figure 5-7297) Remove the screw e and the bushing r; then, remove the transfer guide t.Figure 5-730qwtre
