• AE Auto Adjustment [4] No. 402In AE auto adjustment, adjustments are made so that the intensity of the lamp in AEmode matches the AE sensor output of manual copy density 5 in reference to copies ofan original (Test Sheet) on the copyboard glass.Making Adjustments1) Place the Test sheet (NA-3) on the Copyboard, and close the copyboard cover.2) Start [4] in service mode, and select No. 402 using the keypad.• The indicator indicates ‘402’.3) Press the OK key.• The scanning lamp turns on, and the scanner moves to the AE position.• AE scanning is executed, and the intensity for AE scanning is automatically set.• Thereafter, the scanner returns to home position, and the scanning lamp turns off.4) Press the Reset key.• Mode selection mode starts, indicating [4].• If necessary, execute No. 304.Table 11-202CHAPTER 11 TROUBLESHOOTINGCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 11-15Item402FunctionAE scanningintensityautomaticadjustmentDescription RemarksAutomatic adjustmentoccurs so that the origi-nal is copied at copydensity 5 when ‘402’ isexecuted.Note: If AE adjustmentfails, the densityindicator LED onthe control panelF5 and F9 flash.If such occurs,make the adjust-ment once again.LighterCopydensity 5DarkerTest Chart Originaldensity
