5. Removing the Separation Roller1) Open the right door, and remove the two mounting screws q from the separationroller assembly support plate w; then, remove the separation roller together with thepressure arm.Figure 8-6362) Remove the stop ring e, and remove the separation roller r.Figure 8-637n Points to NoteWhen attaching the separation roller q, make sure that the D-cut in the roller collaris toward the front of the pedestal.Figure 8-638CHAPTER 8 PAPER DECK PEDESTALCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-33q wreq(rear)(front of pedestal)