6) Remove the nine mounting screw t, and remove the pick-up assembly y.Figure 8-6283. Removing the Pick-Up Roller1) Remove the pick-up assembly.2) Remove the stop ring q, and remove the pick-up roller w together with the rollercollar.Figure 8-629n Points to NoteWhen attaching the pick-up roller q to the pick-up assembly, make sure that theround mark w on its rubber portion is toward the front of the pedestal.Figure 8-630a. The collars for the pick-up roller are identified by the color: use the gold collar for thefront, and the silver color for the rear.b. Do not separate the rubber portion of the pick-up roller from the collar.8-30CHAPTER 8 PAPER DECK PEDESTALCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)w qqwCollar(front of pedestal)tyt
