CHAPTER 11 TROUBLESHOOTINGCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 11-253 Adjusting the Tension of the Scanner CableLoosen the binding screw, and align the tensioner plate to the line marked with ascribe in advance.Or, tighten the binding screw so that the wire spring and the hole in the side plateshown in Figure 11-219 is 0 to 3 mm when viewed from the front.Figure 11-219Line drawn with a scribeBinding screw r=0 – 3mmWire springTensioner plate
