Canon Pixma MP530 User Manual

Also see for PIXMA MP530: Supplementary guide User guide Setup instructions Setup sheet Quick start guide

Check the size of the print data. For Windows XP and Windows 2000, if thesize of the data is too large, part of it may be lost. When the spool format isThe size of the print data is too large. EMF, follow the procedure below.1. Open the printer properties dialog box.2. On the [Page Setup] tab, click [Print Options].3. Select the [Reduce spool data size] check box, and click [OK].W Note• When [Reduce spool data size] is set, the print quality may bedegraded.• This is useful when a part of straight lines or data is lost for page layoutprinting.Performing automatic duplexprinting• When CopyingSelect [Use reduced printing] in the printer driver. It may solve theproblem.1. Open the printer properties dialog box.2. Click [Print Area Setup] in the [Page Setup] tab and select [Use reducedprinting].1. In the [Print] dialog box, select [Duplex Printing & Margin] from the pop-up menu.2. Select [Automatic Duplex Printing], and select [Use reduced printing] inPrint Area.Cause ActionThe document is not loaded Check that the document is loaded correctly on the Platen Glass or in thecorrectly. ADF.See "Loading Documents" on page 19.The quality (Print quality) displayed Set the image quality suitable for the document.on the LCD is not suitable for the See "Copying" on page 40.document.. The document is not loaded with the When loading the document on the Platen Glass, the side to be copiedside to be copied face down. should be face down.When loading in the ADF, the side to be copied should be face up.The document or photograph set on Image quality may be poor if you copy a printed document or photograph.the Platen Glass or in the ADF was Instead, reprint the photograph directly from the digital camera, or thei printed from your machine. document from your computer.The Platen Glass or inner side of the Clean the Platen Glass or inner side of the Document Cover, or the ADF.Document Cover is dirty. See "Cleaning the Platen Glass and Document Cover" on page 107.Back of Paper is Smudged/Paper Does Not FeedProperly/Printed Surface is Scratched122 Troubleshooting Chapter 9