2 Use [~] or~] to select , then press [OK].IZOOM 25-400% I- 100% +3 Use [~] or ~] to select a copy ratio by the percent between 25% and 400%.• Pressing [....-l decreases the copy ratio and pressing [.....J increases the ratio.• Press and hold down [....-l or ~J to quickly advance through the ratios.W NoteThe ratio can be also input by using the numeric buttons.4 Press [OK].• Using Automatic Copy Ratios (Fit To Page)You can set the machine to automatically reduce or enlarge the document to fit the page sizeyou selected in .1 Press [Enlarge/Reduce].2 Use [~] or~] to select .ENLARGE/REDUCE~ FIT-TO-PAGE ~W NoteWhen is selected, the document loaded in the ADF cannot be scanned.3 Press [OK].The message appears on the LCD.W NoteIf the document is not properly reduced or enlarged to fit the page size, use preset or customcopy ratios and try copying again.• Adjusting Exposure (Intensity)Exposure (intensity) is the degree of difference between light and dark. Increasing the exposuresetting further blackens dark areas and whitens bright areas. Conversely, decreasing theexposure setting reduces the difference between bright and dark areas. You can adjust theexposure between five gradations.1 Press [Exposure].INTENSITY~ *MANUAL ADJUST ~2 Use [. or ~] to select the or (A».3 Press [OK].42 Copying Chapter 2 |
