Setting the Image Quality100Making Advanced Adjustment (Auto flesh-tone) (SX800)[Advanced adjustment] - [Auto fleshtone]You can represent the skin color impres-sively.Press the OK button to accept your settingand then press the MENU button.• The adjustment you have made isstored as an adjusted value of input sig-nals being projected in an image mode.Adjusting Fine Color Adjustment (6-axiscolor adjust) (SX80 II)[Advanced adjustment] - [6-axis color adjust]You can make fine color adjustment withRGB (red, green, blue) and CMY (cyan,magenta, yellow). For the details of 6-axiscolor adjust, refer to the page 155.When you have completed the adjust-ment, press the MENU button.• [Off] is the factory default.• The adjustment you have made isstored as an adjusted value of input sig-nals being projected in an image mode.ANALOG PCCOMPONENTVIDEOOff Disables the [Auto fleshtone] function.LMHSpecifies the intensity of the [Auto flesh-tone] in three steps.Advanced adjustmentImage adjustmentAuto fleshtoneHDMI COMPONENTDIGITAL PC VIDEO/S-VIDEOANALOG PC USBOff Disables the 6-axis color adjustment.If you select [Adjust], the previous set-ting of 6-axis color adjustmentbecomes active again.Adjust Enables the 6-axis color adjustment.Use [ ] / [ ] to select [ Hue] or [Saturation], then adjust them with [<] /[>].Reset Returns any adjustment values to zero.Advanced adjustmentImage adjustment6-axis color adjust<<
