Part Names28Top ControlKEYSTONE buttonCorrects keystone distortion. (P60)[ ] [ ]: For keystone adjustment.Press KEYSTONE and then AUTO SET toadjust the keystone automatically.• Moves the image up and down whenthe D. image shift is selected. (P64)• [ ] [ ]: Adjust the vertical position.<<<<MENU button (P76)Displays a menu on the screen.AUTO SET button (P53)Performs input signal setting,keystone distortion adjust-ment, focusing (SX80 II), andscreen color correction (SX80II) automatically.FOCUS button (P59)Adjusts focusing.[ ] [ ]: For rough adjustment.[<] [>]: For fine adjustment.In SX80 MarkII, press FOCUS andthen AUTO SET to adjust the focusautomatically.<<ZOOM button (P58)Adjusts the image size.[ ] [ ]: For rough adjust-ment.[<] [>]: For fine adjustment.<<OK button (P78)Determines the item se-lected from the menu.INPUT button (P55)Switches among input signals.WARNING lamp (P138)Flashes red when a problem has beendetected on the projector.POWER button/lamp (P49, P68)Turns the projector on or off.Green: The projector is on.Flashing green: The projector is be-ing turned on.Red: The projector can be turned on.Flashing red: The projector is beingturned off (the lamp is being cooled).Pointer/VOL button (P77, P71)Adjusts the sound volume.[<]: Decreases the volume.[>]: Increases the volume.Selects the upper, lower, left orright item in the menu.AUTO PC button (P57)Adjusts tracking and so on automatical-ly in accordance with signal from acomputer when ANALOG PC-1 or ANA-LOG PC-2 is selected.LED illumination lamp (P106)Indicates the projector status with LEDs.Blinking from the left: The projector is being turned on.Blinking from the right: The projector is being turned off.Middle LED flashing slowly: The image is being blanked out.Left and right LEDs flashing slowly: The image is freezing.
