79Setting Up Functions from MenusSetting Display StatusSelecting an Image Projection Mode[Aspect]You can select a projection mode corre-sponding to the aspect ratio of image.• Different contents are displayed for dif-ferent screen aspects or input signaltypes.• The ASPECT button on the remote con-trol can also be used to select theAspect settings.Press the OK button to accept your settingand then press the MENU button.HDMI COMPONENTDIGITAL PC VIDEO/S-VIDEOANALOG PC USBAuto An image is projected at an aspectratio of the input signal. Select thismode for normal image projection.4:3 An image is projected at an aspectratio of 4:3. Select this if an image of4:3 aspect ratio cannot be appropri-ately projected in the [AUTO] mode.16:9 An image is projected at an aspectratio of 16:9. Select this if an image of16:9 aspect ratio cannot be appropri-ately projected in the [AUTO] mode.AspectDisplay settingsZoom An image with 4:3 aspect ratio is pro-jected in the center of the screenenlarged in 16:9 aspect ratio with theupper and lower portion of the imagecut off. Select this when projectingvisual software having aspect ratio of4:3 and black belts at the top andbottom of the image.• This mode is available when youselect [16:9] or [16:9 D. imageshift] for [Screen aspect] andselect [HDMI (576p, 480p) (SX80II)], [COMPONENT (576p, 480p,576i, 480i)], [VIDEO] or [S-VIDEO(SX80 II)] for input signal.True size An image is projected with the origi-nal resolution of the input signal.Select this to clearly project com-puter screen images having a resolu-tion SXGA+ or lower (VGA, SVGA,XGA or SXGA) or visual software hav-ing a resolution lower than 1035i.• This mode is available when youselect [HDMI (720p, 576p, 480p)(SX80 II)] or [COMPONENT (720p,576p, 480p)] for input signal.• It is not available for an image hav-ing a resolution higher thanSXGA+ or visual software having aresolution of 1080i, 1080p, 1035i,576i or 480i.• It is also available if the input sig-nal is [ANALOG PC-1], [ANALOGPC-2], or [DIGITAL PC (SX80 II)];however, it may not be availabledepending on the screen aspectsetting.• [Auto] and [True size] are not availableif the input signal type is [VIDEO].• [Auto] is automatically selected if theinput signal type is [USB]. (SX80 II)
