67Projecting an ImageSelecting an Image ModeYou can select an image mode depending on the projecting image.In each image mode, you can further adjust the brightness, contrast, sharpness, gamma,color adjustment, advanced adjustment, and lamp mode. (P93)■Image modesStandardSelect this to project an image with near-original quality and a high regard for reproduc-tion of white. It is suited to project text-based computer screens or visual software (mov-ing pictures) in a bright room.PresentationSelect this to project an image with quality suited for the presentation. It is also suited toproject visual software (moving pictures) with a high regard for the brightness.MovieSelect this to project common visual software (moving pictures). It is suited to easily enjoythe atmosphere of a moving theater in a dim room.sRGBSelect this if you want to project an image in the display mode conforming to the sRGBstandard (P152). It is suited to project an image shot by sRGB-compatible digital camera.Photo (SX80 II)If you select [Photo] for [Image mode], make sure to set [Ambient light] in the [Imageadjustment] as well.You can correct an image according to the ambient light based on [sRGB] in [Imagemode] and project the image with higher tone on the screen by setting [Ambient light]. Itis suited to project an ornamental photo, etc. under an ambient light.It is available if the input signal is [ANALOG PC-1], [ANALOG PC-2], [DIGITAL PC], or [USB].■How to Select an Image ModePress the IMAGE button on the remote control to select your desired image mode.The selection is toggled among aspect types by pressing the button.You can also select any image mode from the [Image mode] menu. (P93)Remote control(SX80 II)
