Preset Setting Tool1014 Admin ToolsPreset TourSet a preset tour whereby the camera tours and monitorsthe multiple presets currently set. [Preset Tour] Tab Display Screen(1) [Preset Tour] selection box.Select when you want to perform a preset tour fromthe following options.[Not used]Preset tour is not performed.[For Viewers]Preset tour is performed when a camera isconnected via the VB Viewer, etc.[Always]Preset tour is always performed.(2) [Set Preset Tour Time] checkboxThis setting is enabled when [For Viewers] or [Always]is selected in (1). Select the checkbox to configure apreset tour at a predetermined time, and enter thestart time and stop time for the preset tour.(3) Tour schedule listA list of presets set for preset tour.(4) [Up] / [Down]Select preset in the list and click [Up] or [Down] tochange sequence of the tour schedule list. Presetstours are performed in order from the top of the list.(5) [Delete]Delete the preset selected from the tour schedule list.(6) [Preset] selection boxSelect the preset you want to add to the tour schedulelist.(7) [Preview]The camera angle switches to the selected preset,and the new angle can be checked in the videodisplay area.(8) [Pause (sec)]Set the time at which the camera stops at the presetposition.You can set between 1 and 900 seconds in 1-secondincrements.(9) [Add]Add the preset to the tour schedule list.(10)[Change]Change the speed or pause time for presets selectedfrom the tour schedule list.Note• Preset tour is not performed while the camera is beingcontrolled with viewers, Admin Tools, etc.• Preset tour is not performed when control privileges areobtained by RM-Lite. Setting the Preset TourSelect [For Viewers] or [Always].Setting the preset tour timeSelect the [Set Preset Tour Time] checkbox.Enter values for [Start Time] and [End Time] to set thepreset tour time.The preset is registered in the tour schedule list. Up to20 presets can be registered.In [Pause (sec)], you can enter the number ofseconds for the camera to remain stationary at thepreset position.When [Preview] is clicked, the camera angle switchesto this preset, and the new angle can be checked inthe video display area.When you want to delete changes made to the tourschedule list and restore the settings registered in thecamera, click [Restore settings].(1)(5)(7)(10)(2)(3)(4)(6)(8)(9)1 Select the touring method from the [Preset Tour]selection box.2 Select the preset number you want to add to the tourschedule from the [Preset] selection box, and thenclick [Add].3 Select a preset in the tour schedule list, and set thepreset operation.4 Click [Change].
