60Video Record Setting(1) [Video Record Action]Select the destination of a video recorded when anevent occurs. To record to a server selected on the[Upload] in the setting page, select [Upload] and torecord to a memory card inserted in the camera,select [Record to Memory Card].NoteThe size and format of video recorded according to the [VideoRecord Action] settings are as follows:Settings must be made in the above setting page to makean actual video recording.Volume Detection(1) [Volume Detection Event]Set volume detection to [Disable] or [Enable].(2) [Detect Criteria]Set the criteria for generating volume detection eventsto [The reference volume level or above] or [Thereference volume level or below].(3) [Reference Volume Level]Set the reference volume level for detection in therange of 1 to 100.Set the reference volume level by performing anactual test while checking [Current Volume Level]before configuring the setting.(4) [Current Volume Level]The current volume level appears on the status bar.The level set in [Reference Volume Level] is indicatedby a red mark.Volume below the reference levelappears in blue, that above the reference levelappears in red.(5) [Detect Criteria Duration (sec)]Set the duration of the detect criteria in the range of 0to 10 (sec.). When the status meeting the detectcriteria has continued for the duration or longer, anON event is generated.(6) [ON Event Operation]Select the operation to be performed upon an ONevent. If [Enable] is selected, (9) [Preset], (10) [VideoRecord] and (11) [E-mail Notification] will be executedaccording to their settings upon an ON event.(7) [OFF Event Operation]Select the operation to be performed upon an OFFevent. If [Enable] is selected, (9) [Preset], (10) [VideoRecord] and (11) [E-mail Notification] will be executedaccording to their settings upon an OFF event.[Event]Setting Video Record, Volume Detection, External Device Output/Input andTimerThe following can be set here.• Video Record SettingSet where video is recorded when an eventoccurs.• Volume DetectionSet the operation to be performed at the time ofvolume detection.• External Device OutputSet external device output.• External Device InputSet the operation to be performed when an eventis triggered by input from an external device.• TimerSet timer events.ImportantWhen using the upload function, or recording to the memorycard, do not change the settings in the [Setting Page]. Doing somay result in the upload function or the recording to memorycard to stop.[Video RecordAction] settings Applied video format Applied video size[Upload] [Upload] > [VideoFormat] settingsWhen the video format is[JPEG], [Video] > [JPEG] >[Video Size: Upload /Memory card]When the video format is[H.264(1)], [Video] >[H.264(1)] > [Video Size][Record toMemory Card][Memory Card] >[Video Format]settings
