98• [Focus Mode]Select [Auto], [Manual], or [Fixed at infinity] forthe focus mode of the camera. (p. 142)• [White Balance]Set the white balance of the camera to [Auto]or according to the light source of thecondition in which it is used. For details onlight sources, see p. 47.• [R Gain], [B Gain]If white balance is set to [Manual], set therespective gains to a value between 0 and1023.(11)[Get camera info]Load the current camera angle and other settings ofthe image display area to reflect them in thepanorama screen and camera parameter settings.(12)[Full Image]Displays the full video obtained from the camera. Apreset preview frame (yellow) reflecting the presetsettings is shown. If you drag to resize or move theframe, the new frame is reflected in the presetsettings.(13)[Update Image]Load the full video from the current camera to updatethe video.(14)[Show in viewers] checkboxSelect this checkbox to use presets in the viewer.When home position is selected in (8), this function isgrayed out.(15)Camera ParametersDisplays the values for the pan and tilt positions andzoom viewing angle in accordance with the size andposition of the preset preview frame on [Full Image].(16)[Get Digital PTZ Info]Load the current crop position of the video displayarea to reflect it in the preset preview frame in [FullImage] and the camera parameters.(17)[Preview settings]Preview camera parameter values that are beingedited, in the video display area.(18)[Clear settings]Delete the settings for the preset selected.(19)[Restore settings]Clear the settings you have specified on the screen ofthe tool and restore the settings saved in the camera.(20)[Save settings]Save the edited preset settings in the camera.If presets have been set, be sure to save the settingsby clicking [Save settings].Setting the PresetSelect presets or home position as needed for theoperating environment or desired objectives. A preset canbe set in the following ways.NoteThe number of presets you can register are as follows.– Maximum 64– Maximum 20 Setting from Camera Angle in the VideoDisplay AreaBe sure to enter the preset name. Use the preview frame of the panoramascreen to set presetsUse the preview frame of the panorama screen to setpresets.Be sure to enter the preset name.1 Select the preset you want to set from the [HomePosition/Preset] selection box, and then fill the [PresetName] field.2 Click the [Obtain/Release Camera Control] button toobtain the control privileges of the camera.3 Operate the camera from the video display area, set itto the desired position and click [Quick Registration].1 Select the preset you want to set from the [HomePosition/Preset] selection box, and then fill the [PresetName] field.
