Making Initial Camera Settings292 Initial Settings(2) [IPv4 Address]If you selected [IPv4 Address Setting Method] >[Manual], enter a fixed IPv4 address.(3) [Subnet Mask]If you selected [IPv4 Address Setting Method] >[Manual], enter the designated subnet mask values foreach network.(4) [Enter a default gateway address] checkboxSelect this to manually set the default gatewayaddress.(5) [IPv4 Default Gateway Address]Be sure to set this if you select [IPv4 Address SettingMethod] > [Manual] and connect to the camera with adifferent subnet than that of the viewer.(6) [AutoIP]Select this to enable or disable AutoIP.(7) [IPv4 Address (AutoIP)]When [Enable] is selected for [AutoIP], anautomatically set IPv4 address is displayed.The camera will restart and the settings will takeeffect.When you click [OK], other settings in ([Password],[Date and Time], [Camera], [Video]) [Basic CameraSettings] will also take effect.Set the Password, Date and Time, CameraName and VideoSet basic camera information, such as the camera name,administrator password and date.Once you have entered information for each item, click[OK]. Password SettingClick [Password] and set the administrator password. Date and Time SettingsClick [Date and Time] and make settings such as thecamera date and time setting method, time zone, anddaylight saving time.For details on each item, please refer to “Setting” (p. 44)in “[Date and Time] Setting Date and Time”. Camera Name SettingClick [Camera] and set the camera name displayed in theviewers and other software.For setting details, please refer to “Camera Name” (p. 46)in “[Camera] Setting Initial Camera Settings and ExternalDevice Name”.4 Click [OK].ImportantTo ensure system security, be sure to change the administratorpassword. Do not forget the new password.
