Canon XA40 Instruction Manual

Also see for XA40: User guide

Contents

Menu Options106[Æ Recording Setup] menu[Available Space in Memory]/[Used Space in Memory]: Displays a screen where you can verify how muchof the SD card is currently available for recording or how much is in use (« total recording time andª total number of photos).• Estimated figures about available clip recording time and available number of photos areapproximate and based on the video configuration currently in use and a photo size of 1920x1080.• You can also check the SD card's Speed Class.[HDMI Time Code]: When set to [i On], the HDMI signal output from the camcorder includes thecamcorder's time code.Menu item Setting options A[¸ Resolution] [3840x2160 (150 Mbps)], [1920x1080 (35 Mbps)],[1920x1080 (17 Mbps)], [1280x720 (8 Mbps)] – 37[¸ Frame Rate] [¼ 59.94P], [» 29.97P], [º 23.98P]  – 37[¸ Audio Format] [ AAC 16bit 2CH], [ LPCM 16bit 4CH]  – 68[Recording Media] [v Rec Media for Movies]:[6 Mem. Card A], [7 Mem. Card B] – 32[{ Rec Media for Photos]:[6 Mem. Card A], [7 Mem. Card B] –[Dual/RelayRecording][v Standard Recording], [4 Dual Recording],[ Relay Recording] (or [ Relay Recording]) – 32[Slow & Fast Motion] [OFF], [x0.4], [x0.5], [x0.8], [x2], [x4], [x10], [x20], [x60], [x120],[x600], [x1200] – 38[Available Space inMemory][6], [7]  – –[Used Space inMemory][6], [7] –  –[Initialize 8] [6 Mem. Card A], [7 Mem. Card B]   32[Rec Command] [i On], [j Off]  – 35[HDMI Time Code] [i On], [j Off]  – –[Time Code Mode] [ Preset], [ Regen.]  – 64[Time Code RunningMode][ Rec Run], [ Free Run]  – 64[DF/NDF] [ DF], [ NDF]  – 66[Initial Time Code] 00:00:00.00 to 23:59:59.29, [Reset]  – 65[User Bit Type] [ Setting], [ Time], [ Date];[i]: user bit input screen (00 00 00 00 to FF FF FF FF). – 67[Color Bars] [j Off], [ SMPTE], [ ARIB]  – 77[1 kHz Tone] [ü –12 dB], [þ –18 dB], [ÿ –20 dB], [j Off]  – 77[MP4 Clip / PhotoNumbering][m Reset], [n Continuous]   –