Using the Optional RC-V100 Remote Controller81Using the Optional RC-V100 Remote ControllerYou can connect the optional RC-V100 Remote Controller to the camcorder’s REMOTE terminal inorder to control the camcorder (including advanced recording functions) from a distance. The remotecontroller lets you turn the camcorder on, navigate the menus and remotely control the aperture andshutter speed, and more.Use the cable supplied with the remote controller to connect it to the camcorder. For details on how toconnect and use the remote controller, refer to its instruction manual.1 Turn off the camcorder and connect the optional RC-V100 Remote Controller to thecamcorder.2 Turn on the camcorder in mode and select [REMOTE Terminal].> [B " System Setup] > [REMOTE Terminal]3 Select [ RC-V100 (REMOTE A)] and then select [X].OptionsNOTES• The following controls on the remote controller will not operate the camcorder:Operating modes:[ RC-V100 (REMOTE A)]:Select this option to use the optional RC-V100 Remote Controller.[ Standard]: Select this option to use commercially available remote controls.Remote cable(supplied with the RC-V100)To the RC-V100’sREMOTE A terminal- CANCEL button- ND button- AGC button- AUTO KNEE button- BLACK GAMMA LEVEL dial- WHITE BALANCE R and B dials- MASTER PEDESTAL dial- AUTO IRIS button- SHUTTER SELECT button- CUSTOM PICT. button- KNEE POINT, KNEE SLOPE dials- SHARPNESS LEVEL dial- MASTER BLACK R and B dials
