Chapter 11-120T-1-80*1: Available only if ManageRemainRoll is On.*2: Displays only on models not equipped with HDD.*3: Available after Auto(Advanced) in Head Posi. Adj. has been used once.*4: Available when you have specified Feed Priority > Adj. Priority > Automatic or Print Quality.*5: Available when you have specified Feed Priority > Adj. Priority > Automatic or Print Length.*6: Displayed if a sheet is loaded in the printer.*7: Not shown if you have set IPv4 Mode to Manual.*8: Not shown if you have set NetWare to Off.*9: Not displayed if IPv6 Support is Off.*10: Not shown if you have set Auto Detect to On.*11: Print Anyway is displayed when a job being held is selected.*12: Viewing and configuration is possible for administrators, and only viewing for other users.*13: Viewing and configuration is possible for administrators only.*14: Follows the setting in Date Format.First Level Second Level Third Level Fourth Level Fifth Level[System Setup] [Nozzle Check] [Frequency] [Standard]*[1 page][Warning] [Off]*[On][Use RemoteUI]*12 [On]*[Off][Reset PaprSetngs]*12[Erase HDD Data]*2*12 [High Speed][Secure High Spd.][Secure][Output Method]*2 [Print]*[Print (Auto Del)][Save: Box XX][Print After Recv]*2 [Off]*[On][Save: Shared Box]*2*12 [Off][On]*[Prep.MovePrinter][Admin. Menu]*12 [Change Password]*13[Init.Admin.Pswd]*13[Printer Info] [Paper Info][Ink Info][Head Info][System Info][Error Log][Other Counter]
