Chapter 88-17Ink tank:BK errorPress OK andreplace ink tank.03830304-256C G ink tank EEPROM error Renew the G ink tankTop cover is open.Turn off printer,wait a while, andturn it on again.03031000-2E0F Top cover abnormally open Close the top cover and turn on the printer again.Ink tank coveris open.Turn off printer,wait a while, andturn it on again.03031000-2E10 Ink tank cover abnormally open Close the ink tank cover and turn on the printer again.Maintenancecartridge full.Replacethe maintenancecartridge.03841001-2819 Maintenance cartridge full Renew the maintenance cartridge.No MaintenanceCartridge capacity.Replacethe maintenancecartridge.03841001-281B Not enough space in the maintenancecartridge prior to cleaningReplace the maintenance cartridge.No maintenancecartridge.Checkthe maintenancecartridge.03841101-2818 Maintenance cartridge not available Set a maintenance cartridge.Insert the maintenance cartridge fully into position.Maintenancecartridge problem.Replacethe maintenancecartridge.03841201-2816 Maintenance cartridge EEPROM error Renew the maintenance cartridge.Maintenancecartridge problem.Replacethe maintenancecartridge.03841201-2817 Maintenance cartridge ID error Renew the maintenance cartridge.Roll printing isselected, but sheetsare loaded.Press OK,remove the sheets,and load a roll.03860002-2E0A Data with a roll media specification hasbeen received when a sheet tray isloaded.Reload the cut sheets.Borderless printngnot possible. Checkroll width andspacers.Online: PrintLoad/Eject:Change Paper03861001-2405 Paper loaded at a position inaccessiblefor borderless printingCheck to see if a borderless printing spacer is installed.Reload the paper.Borderless printngnot possible. Checkpaper size setting.Online: PrintLoad/Eject:Change Paper03861001-2406 Data unfit for borderless printing Check the paper size.Change the paper size.Insufficient paperfor jobOnline: PrintStop: Stop PrintingLoad/Eject:Change Paper03862000-2E09 Not enough roll media on remaining rollmedia quantity detectionRenew the supply of roll media.Wrong paper size.Check paper sizesetting on computer.Online: PrintStop: Stop Printing03063000-2E08 Mismatch between data width and paperwidthVerify the paper size setting.Cannot cut paper.Press Load/Ejectand reload thepaper.03870001-2015 Cutting failure Cut paper manually.Check the cutter.Display massage Code* Condition detected Action