Chapter 22-482.3.3.2.2 Roll Media Pick-up Sequence0013-4173iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300SWhen the roll media detects the loaded roll media, roll media pick-up operation starts.When media is fed from the auto roll feed unit by the specified length, the nulti sensor performs the adjustments and detection shown below, thus completing theroll media pick-up operation.Roll media is fed by controlling the roll motor and feed motor of the auto roll feed unit.F-2-39Roll media loadingRoll media detectionLight intensity/Detection of leading edge of media *2Detection of skewed mediaMedia width detectionDetection of leading edge of media *2End of roll media pick-upPrinting(manual)(roll media sensor)Detection of bar code pattern *1*1- This operation is performed only when "ON" is selected for "Detect Remaining Roll Media".- If the roll media does not have a bar code pattern on it, enter the length of the roll media using the menu on the operation panel.*2- The purpose of the first leading edge detection is to detect presence of media.- The purpose of the second leading edge detection is to detect the printing start position.Head hight adjustment
