Chapter 11-127T-1-88Setting Item Description/Instructions[System Setup] [Erase HDDData][High Speed] Delete the file management information of the saved data in the HDD.[Secure HighSpd.]Overwrite the random data in the whole of the hard disk drive.[Secure] Overwrite 00 and FF and random data in the whole of the hard disk drive once at a time.Execute the verify check whether the data has written correctly to the hard disk drive.[Output Method] [Print] Select the output method of jobs sent from software other than the printer driver. This can beset from the printer if you are using a printer driver.Select [Print] to print normally. Select [Print (AutoDel)] to print and delete the data in hard disk.Select [Save: Box XX] to save to box without printing.[Print (AutoDel)][Save: Box XX][Print After Recv] Setting of jobs sent from software other than the printer driver. This can be set from the printerif you are using a printer driver. Select [On] to print after saving.[Save: Shared Box] Select [Off] to print without saving to a common box.[Prep.MovePrinter]Select when moving the printer. Follow the instruction on the screen and perform the necessaryprocess.This is not displayed when displaying a warning message about the amount remainingmaintenance cartridge.[Admin. Menu] [Change Password] Set a password to restrict displaying/setting of menus as follows. Allowed value is from 0 to9999999.- Allow only administrator to display/set[IPv4][Change Password][Init.Admin.Pswd]- Allow administrator to display/set and non-administrator to display only[Interface Setup](exclude [IPv4])[Date & Time][Date Format][Time Zone][Use RemoteUI][Reset PaprSetngs][Save: Shared Box][Init.Admin.Pswd] Press [OK] to return the [Administrator Menu] password to factory default.[Printer Info] [Paper Info] Indicates the current paper size, type, and related printer settings.[Ink Info] Indicates ink levels and maintenance cartridge capacity.[Head Info] Indicates information about the printhead.[System Info] Indicates the firmware version, serial number, and interface information.[Error Log] Indicates the most recent error messages (up to five).[Other Counter] Indicates the total printing volume of the printer.
