Canon iPF800 Series Service Manual

Also see for imagePROGRAF iPF810: Brochure Troubleshooting guide Brochure & specs User manual

Contents

Chapter 88-6Hardware error.03130031-2E22Turn off printer, wait,then turn on again.03130031-2F22 Pump travel timeout Check the purge unit.Hardware error.03130031-2E23Turn off printer, wait,then turn on again.03130031-2F23 Purge motor errorPump inoperableCheck the purge unit.Hardware error.03130031-2E25Turn off printer, wait,then turn on again.03130031-2F25 Unable to detect the carriage motor home position Check the carriage unit. Check the linear encoder forsmears.Hardware error.03130031-2E26Turn off printer, wait,then turn on again.03130031-2F26 Carriage inoperable Check the carriage unit and surrounding parts.Hardware error.03130031-2E27Turn off printer, wait,then turn on again.03130031-2F27 Carriage travel timeout Check the carriage unit and surrounding parts.Hardware error.03130031-2E1FTurn off printer, wait,then turn on again.03130031-2F1F Pump cam sensor error Check the purge unit.Hardware error.03130031-2E2ATurn off printer, wait,then turn on again.03130031-2F2A Unable to detect the feed roller home position Check the feed roller encoder and surrounding part.Check to see if paper has not jammed.Hardware error.03130031-2E29Turn off printer, wait,then turn on again.03010000-2F29 Feed motor timeout (Roll media) Check the roll feed unit. Check roll media. Check to seeif paper has not jammed in the printer.Hardware error.03130031-2E2ETurn off printer, wait,then turn on again.03130031-2F2E Roll travel timeout Check the roll feed unit.Hardware error.03130031-4027Turn off printer, wait,then turn on again.03130031-4027 Lift travel timeout error Check the carriage unit and surrounding parts.Hardware error.03130031-2E13Turn off printer, wait,then turn on again.03130031-2F13 A/D converter external trigger output stop detectionhardware error 1Replace the new printhead.Hardware error.03130031-2F32Turn off printer, wait,then turn on again.03130031-2F32 Multi sensor error Check the environment for interferences from outsidelight.Replace the multi sensor unit.Hardware error.03130031-2F3ATurn off printer, wait,then turn on again.03130031-2F3A Valve motor error Check the ink supply unit.Hardware error.03130031-2F3BTurn off printer, wait,then turn on again.03130031-2F3B CS communication error Remove the ink tanks and then reload them.Check the main controller PCB.Hardware error.03130031-260ETurn off printer, wait,then turn on again.03130031-260E Gap detection error Check the carriage unit and surrounding parts.Replace the main controller PCB.Hardware error.03130031-2618Turn off printer, wait,then turn on again.03130031-2618 VH voltage error Check the power supply unit.Hardware error.03130031-260FTurn off printer, wait,then turn on again.03130031-260F Gap reference surface error Replace the reference surface sheet.Display massage Code* Condition detected Action