Canon iPF800 Series Service Manual

Also see for imagePROGRAF iPF810: Brochure Troubleshooting guide Brochure & specs User manual

Contents

Chapter 11-46[GL2 Settings]T-1-23Setting Item Description, Instructions[Color Mode] [Monochrome] Print by the monochrome.[Color(CAD)1] Print by the standard color.[Color(CAD)2] Print by the bright color.[Color(CAD)3] Print by the color emulated the Canon BJ-W3000/W3050.[Color(CAD)4] Print by the color emulated the HP Designjet 500/800.[Color(CAD)5] Print by the color emulated the HP Designjet 1000.[Color(CAD)6] Print by the color emulated the HP Designjet 4000/4050.[Print Quality] Select the print quality.[Print (Economy)] Prints with a lower grade of print than normal, but with less ink consumption. Select [ON] toeconomize on inks.[Input Resolution] Choose the printer input resolution from between [600dpi] and [300dpi].[Paper Source] Select how to feed paper for printing on the HP-GL/2.[Conserve Paper] Prints by economizing on paper.[Line Cap] Choose the shape of the end of a line from between [Software] and [Rounded].[Smoothing] Choose whether to draw an arc with a smooth curve or with a polygon.[Line Width] Select the width of each line to print for data that does not have a line width specified. The linewidth is expressed in increments of 300 dpi.[ThickenFineLines] Select [On] to print thin lines clearly.[AdjustFaintLines] If thin lines print in a tint of color varied from other patterns, selecting [Off] may provide theprint result as intended, though the thin lines may print, interrupted, depending on the color.[Auto Rotate] If a document has its long side shorter than the roll width, the page rotates by 90 degreesautomatically to economize on paper. If a document contains horizontally long data such thatit has its long side longer than the roll width and its short side shorter than the roll width, thepage rotates 90 degrees to print within the boundaries of the paper.HP RTL cannot rotate.[Nesting] [Use Nesting] Select [On] to print pages when they are tiled fully to the roll width, instead of printing themone by one.[Nesting WaitTime] Set the time to elapse before printing.[Cut Lines] Select [On] to print perforated lines between pages.[On-the-Fly] In printing data consisting solely of HP RTL, if the data is slow to print, select [On] to expeditethe time at which the data starts printing. Verify the print result to make sure that images arenot chipped in this case.