Chapter 11-291.5.6 Carriage 0020-5456iPF810 / iPF820F-1-26[1] Printhead fixer coverClamps the printhead.[2] PrintheadA principal part that houses nozzles.[3] Printhead fixer leverLocks the printhead fixer cover.[4] Shaft cleanerKeeps the carriage shaft clean.[5] Slant adjustment leverMakes fine-adjustments with the misregistration of ruled lines printed.1.5.7 Ink Tank Cover (Inside) 0020-5457iPF810 / iPF820F-1-27[1] Ink tankInk-specific cartridge.[2] Ink tank lock leverLocks and thus protects the ink tank. Move this lever up and down to replace the ink tank. To open, raise the stopper of the lever until it won't go farther and thenpush it to the front. To close, depress the stopper until it clicks.[3] Ink lamp (red)Indicates the status of the ink tank when the ink tank cover is opened, as follows:- OnAn ink tank is properly loaded.- OffNo ink tank is loaded, or the remaining ink sensor is disabled.- Slow blinkingLow on the inks.- Fast blinkingInks are out.[4] Ink color labelLoad an ink tank to meet the color and name of the label.[5] Ink setInk tanks that can be used with this printer are labeled [A] on their side, which is printed in a white letter enclosed in a black circle.[3][2] [1][4][5]AAMBKBKMCY[3][2][1][4][5]
