Canon iR1018 Series Portable Manual

Also see for iR1018: Driver guide Service manual Brochure & specs Advanced operation guide Quick start guide

Contents

Chapter 522T-5-95.1.1.7.2 Detailed Discussions of Bit 20013-1320/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /It converts "inch" into "mm" when transmitting the received image data.Scanning direction in conversion follows the Bit 2 setting of SW14.5.1.1.8 SSSW-SW145.1.1.8.1 List of Functions0013-1321/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /T-5-105.1.1.8.2 Detailed Discussions of Bit 20013-1322/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Use it to specify whether to convert or not convert an inch-configuration resolution into a millimeter-configuration resolution for image read in G3 transmission:either in sub scanning direction only or in both main and sub scanning directions. The setting is valid only when bit 1 of SW05 of #SSSW is set to '1'.5.1.1.8.3 Detailed Discussions of Bit 40013-1323/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Use it to specify whether to declare or not declare an inch-configuration resolution to the other machine for G3 communication: if 'declare' is selected, the machinewill indicate that it reads and records at an inch-configuration resolution using the DIS, DCS, or DTC signal.5.1.1.9 SSSW-SW285.1.1.9.1 List of Functions0013-1324/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /T-5-115.1.1.9.2 Detailed Discussions of Bit 00013-1325/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is inhibited at calling and the V.21 protocol is used.Bit Function 1 00 not used - -1 not used - -2 Convert "inch" into "mm" when transmitting the receivedimage dataconvert do not convert3 not used - -4 not used - -5 not used - -6 not used - -7 not used - -Bit Function 1 00 not used - -1 not used - -2 direction of scanning for inch/mm conversion both main and subscanning directionssub scanningdirection only3 not used - -4 inch-configuration resolution declaration declare do not declare5 not used - -6 not used - -7 not used - -Bit Function 1 00 Caller V.8 protocol NO YES1 Called party V.8 protocol NO YES2 Caller V.8 protocol late start NO YES3 Called party V.8 protocol late start NO YES4 V.34 reception fallback Prohibited Not prohibited5 V.34 transmission fallback Prohibited Not prohibited6 not used - -7 not used - -