Canon iR1018 Series Portable Manual

Also see for iR1018: Driver guide Service manual Brochure & specs Advanced operation guide Quick start guide

Contents

Chapter 530If any operation error occurs after changing the setting value, change the setting value to the original one.5.1.4.2 <024:CIS scan position during ADF scanning> 0013-1356/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /This value is used when automatic scan position adjustment (TESTMODE>"2"SCAN TEST>"3"SHEET POS ADJ) fails.5.1.4.3 <026:Distance from the standby position of CIS to the shading start point> 0013-1357/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /White shading can be adjusted finely.Normally, do not change the setting value. If any operation error occurs after changing the setting value, change the setting value to the original one.5.1.4.4 <031: Vertical scan start position adjustment> 0013-1358/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Adjust the position at which vertical scanning of a book starts. The larger the adjustment value, the narrower the left-side margin of the image becomes.5.1.4.5 <032: Horizontal scan start position adjustment> 0013-1359/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Adjust the position at which horizontal scanning of a book starts. The larger the adjustment value, the narrower the top margin in the image becomes.033: Vertical scan magnification correction 32 0-32 one unit=0.1%034: Horizontal scan magnification correction 32 0-32 one unit=0.1%035: - 036: Reader motor speed adjustment 555037: - 040: Not used041: Vertical scan start position adjustment (scanningon ADF)0 0-70 one unit=0.1mm042: Horizontal scan start position adjustment(scanning on ADF)219 170-270 one unit=0.1mm043: Horizontal scan end position correction(copy:scanning on ADF)75 0-200 one unit=0.1mm044: Horizontal scan end position correction(superfine:scanning on ADF)75 0-200 one unit=0.1mm045: Horizontal scan end position correction(fine:scanning on ADF)75 0-200 one unit=0.1mm046: Horizontal scan end position correction(standard:scanning on ADF)75 0-200 one unit=0.1mm047: Vertical scan magnification correction (scanningon ADF)32 0-32 one unit=0.1%048: Horizontal scan magnification correction(scanning on ADF)32 0-32 one unit=0.1%049: - 053: Not used054: Pickup motor speed correction (when the ADF isused)32 0-32 one unit=0.1%055: - 192: Not used193: ADF special paper, standardized size: LGLmisidentification-ready0 0 : LEGAL1 : FOOLSCAP2 : M_OFFICIO3 : A_FOOLSCAP4 : FOLIO5 : G_LEGAL6 : A_OFFICIO7 : B_OFFICIO194: ADF special paper, standardized size: LTRmisidentification-ready0 0 : LTR1 : G_LTR2 : A_LTR195: ADF special paper, standardized size: LTR_Rmisidentification-ready0 0 : LTR_R1 : FOOLSCAP2 : OFFICIO3 : E_OFFICIO4 : G_LTR_R5 : A_LTR_R196: - 212: Not used213: XYZ correction value of (X) of standard whiteplate (equipped with SEND functions)8273 1-9999214: XYZ correction value of (Y) of standard whiteplate (equipped with SEND functions)8737 1-9999215: XYZ correction value of (Z) of standard whiteplate (equipped with SEND functions)9427 1-9999216: - 350: Not usedNo. Function Default Setting range Unit