Canon iR1018 Series Portable Manual

Also see for iR1018: Driver guide Service manual Brochure & specs Advanced operation guide Quick start guide

Contents

Chapter 5235.1.1.9.3 Detailed Discussions of Bit 10013-1326/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is inhibited when called and the V.21 protocol is used.5.1.1.9.4 Detailed Discussions of Bit 20013-1327/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /If ANSam signal is not received during transmission, select whether to use the V.8 protocol when the other fax machine declares the V.8 protocol in DIS signal. IfNO is selected, the CI signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies the V.8 protocol is received.The V.8 late start is not executed during manual transmission regardless of this setting.5.1.1.9.5 Detailed Discussions of Bit 30013-1328/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Select whether to declare the V.8 protocol in DIS signal for reception. If NO is selected, the V.8 protocol cannot be used because it is not declared in DIS signal.The V.8 late start is not executed during manual reception regardless of this setting.5.1.1.9.6 Detailed Discussions of Bit 40013-1329/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Select whether the receiver falls back during V.34 reception. If 'Prohibit' is selected, the receiver does not fall back.5.1.1.9.7 Detailed Discussions of Bit 50013-1330/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /Select whether the transmitter falls beck during V.34 transmission. If 'Prohibit' is selected, teh transmitter does not fall back.5.1.1.10 SSSW-SW305.1.1.10.1 List of Functions0013-1331/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /T-5-125.1.1.10.2 Detailed Discussions of Bit 50013-1332/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /When "Detect with the new method" is selected, tone is detected for 3.5 seconds before call origination in order to discriminate between dial tone and voice. If dialtone is detected and the time since line seizure is 3.5 seconds or longer, call origination takes place immediately. If the time since line seizure is less than 3.5 seconds,call origination takes place after waiting for 1 second. (If the time since line seizure reaches 3.5 seconds during the 1-second waiting period, call origination takesplace immediately. By default, "Detect with a new method" is assigned for this SW.5.1.1.11 SSSW-SW345.1.1.11.1 List of Functions0013-7930/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /T-5-13Bit Function 1 00 Not used - -1 Not used - -2 Not used - -3 Not used - -4 Not used - -5 New dial tone detection method Detect with the newmethod.Detect with theexisting method.6 Not used - -7 Not used - -Bit Function 1 00 Display the waste toner fullwarningYES NO1 Switch the waste toner fullwarningDrum replacement requiredmessage displayed on anoperator callE019 displayed on an servicecall2 Not used - -3 Not used - -4 Not used - -5 Not used - -6 Not used - -